Basket filter AISI 304 - AISI 316

MINI BASKET is a filter with manual cleaning and a stainless steel body and inside provided with a stainless steel AISI 316 basket.
MINI BASKET filter has no mechanical parts in movement and it is easy to open for cleaning operations and it is provided with manual drain valve for draining.
It can be used to protect water circulation pumps, to prevent the ingress of particoles which could damage the pump impeller and the plant.

 

Basket filter AISI 304 - AISI 316

BASKET is a filter with manual cleaning and a stainless steel body and inside provided with a stainless steel AISI 316 basket with a filtration degrees between 110 μm to 5 mm.
The filter is provided with support frame,manual drain valve,manual ventvalve and pressure gauges.
BASKET filter has no mechanical parts in movement and it is easy to open for cleaning operations.
 

Centrifugal separating filter AISI 304 - AISI 316

VORTEX is a centrifugal separating filter with a stainless steel body and a manual drain at the bottom.
It is particularly indicated to treat water containing sands and/or suspended solids of a specific gravity superior to the water (P ≥ 1).
The filter is able to remove until 99% of sands and/or suspended solids with dimensions bigger than 75 μm and until the 65% with dimensions bigger than 50 μm.
It has been designed to prevent at its best the drain losses but maintaining the best separating efficiency.
VORTEX works continuously, it does not contain filtrating elements or parts in movements, it can be inspected and can be provided of an automatic drain.

 

Collecting impurities filter AISI 304 - AISI 316
 

SIMPLEX is a manual cleaning screen filter with stainless steel body.
The internal filtrating cartridge consists of an AISI 316 stainless steel tubular screen on which can be inserted a polyester filtrating mesh (PES) or can be fixed a stainless steel AISI 316 double screen (REPS).
The filtration fields is between 25 to 2000μm.
To clean the cartridge it is necessary to remove the cover at the bott om of the filter which is provided with drain manual valve and pressure gauges.
The SIMPLEX filter has no mechanical parts in mouvment and and is designed for future installations of our automatic cleaning systems.
 

Semi automatic filter with brushes AISI 304 - AISI 316

BRUSH is a semi-automatic cleaning screen filter with a stainless steel body.
The internal filtrating cartridge consists of a stainless steel AISI 316 tubular screen on which can be inserted a polyester filtratin mesh (PES) or fixed a stainless steel AISI 316 filtrating double screen (REPS).
The filtration degrees is from 25 to 2000 μm.
The cartridge is cleaned by a series of brushes manually operated by an external handle.
The filter is supplied with manual valves and pressure gauges.
For its best performance, BRUSH needs the inlet pressure of at least 0.5 bar, ensuring short times and low water consumption during the cleaning cycle.
During this phase the outlet flux is stopped.

Semi-automatic filter with suction pads AISI 304 - AISI 316

VACUUM is a semi-automatic cleaning screen filter.
The “sandwich” type internal cartridge consists of a polyester or stainless steel AISI 316 filtrating mesh closed between two stainless steel AISI 316 tubular screen.
The filtration range is from 25 to 810 μm. The cartridge is cleaned by a series of suction pads manually moved by an external handle.
The filter is supplied with manual valves and pressure gauges.
For its best performance the VACUUM needs an inlet pressure of at least 3 bars, ensuring short times and low water consumption during the cleaning cycle.
During this phase the filter continues to produce permeate.

 

Semi automatic filter pressurized nozzles AISI 304 - AISI 316

RAPIDJET is a semi-automatic screen filter with stainless steel body.
The internal filtrating cartridge consists of an AISI 316 stainless steel tubular screen on which can be inserted a polyester filtrating mesh (PES) or a stainless steel AISI 316 filtering double screen (REPS). The filtration range is from 25 to 2000 μm.
The cartridge is cleaned by a series of pressurized nozzles (fed with clean water at 4-5 bar from an external socket) manually operated by an external handle.
The filter is supplied with manual valves and pressure gauges.
For its best performance RAPIDJET needs an inlet pressure of at least 0.5 bars, ensuring short times and low water consumption during the cleaning cycle.
During this phase the inlet and the outlet flux are stopped.
 

Automtic filter with suction pads AISI 304 - AISI 316

ROTOR is a self-cleaning screen filter with stainless steel body.
The “sandwich” type internal cartridge consists of a polyester or stainless steel AISI 316 filtrating mesh closed between two stainless steel AISI 316 tubular screen.
The filtration range is between 25 to 810 μm and the cartridge is cleaned by a series of suction pads on a rotating shaftwhich is moved by a 24 Vcc electric motor.
The filter is supplied and already wired with: automation group, valves and pressure gauges.
For the best performance the ROTOR filter needs an inlet pressure of at least 3 bars that grants brief times and low water consumption during the cleaning cycle.
Cleaning cycle take over without flow interruption, allowing continuity on the filtration process.

 

Filter with bag AISI 304 - AISI 316

NW BAG is a manual cleaning separator filter with stainless steel body.
It is provided with an internal filtrating bag with filtration degrees from 1 to 200 μm.
The filter is provided with a support, manual drain valve, automatic vent valve and pressure gauges.
NW BAG filter has no mechanical parts in movement and it is easy to open for cleanining/subsitution of the filtrating bag.

 

Automatic filter with brushes AISI 304 - AISI 316ww

TURBONET is a self-cleaning screen filter with a stainless steel body.
The internal filtrating cartridge consists of a stainless steel AISI 316 tubular screen on which can be inserted a polyester filtraing mesh (PES) or fixed a stainless steel AISI 316 filtrating double screen (REPS).
The filtration degree is from 25 to 2000 μm. The cartridge is cleaned by brushes mounted on a rotating shaft and moved by a 24Vcc electric motor.
The filter is supplied and already wired with: automation group, valves and pressure gauges.
For its best performance the TURBONET needs an inlet pressure of at least 0.5 bar, ensuring short times and low water consumption during the cleaning cycle.
During this phase the outlet flux is automatically stopped.

 

Automatic filter pressurized jets AISI 304 - AISI 316

AUTOJET is a self-cleaning screen filter with stainless steel body.
The internal filtrating cartridge consists of an AISI 316 stainless steel tubular screen on which can be inserted a polyester filtrating mesh (PES) or a stainless steel AISI 316 filtering double screen (REPS). The filtration range is between 25 to 2000 μm.
The cartridge is cleaned by pressurized nozzles (fed by clean water) which are fixed on a rotating shaft moved by a 24 Vcc electric motor.
The filter is supplied and already wired with: automation group, valves and pressure gauges.
For its best performance, AUTOJET needs the inlet pressure of at least 0.5 bars, ensuring short times and low water consumption during the cleaning cycles.
During this phase the inlet and the outlet fluxes are automatically stopped.
 

Automatic filter pressurized jets AISI 304 - AISI 316

ACQUASPEED is a separator filter for little flow rates with automatic cleaning cycle and a stainless steel body.
The internal filtrating cartridge consists of a stainless steel AISI 316 tubular screen on which can be inserted a polyester bag (PES) or fixed a stainless steel AISI 316 screen (REPS).
The filtration degrees are between 25 to 400 μm.
The cartridge is cleaned by pressurized jets formed by the inlet pressurization water through an exclusive system we developed and perfected
The filter is provided and wired with: automation group, valves and pressure gauges.
For its best performance, ACQUASPEED needs the inlet pressure of at least 3 bar, ensuring short times and low water consumption during the cleaning cycle.
During this phase the outlet flux is stopped.

 

Automatic filter with suction pads AISI 304 - AISI 316

ROTOR HP is a self-cleaning screen filter with stainless steel body suited to extreme employment’s conditions.
The “sandwich” type internal cartridge consists of a polyester or stainless steel AISI 316 filtrating mesh closed between two stainless steel AISI 316 tubular screen.
The filtration range is between 25 to 810 μm and the cartridge is cleaned by a series of suction pads on a rotating shaft which is moved by a 24 Vcc electric motor.
The filter is supplied and already wired with: automation group, valves and pressure gauges.
For the best performance the ROTOR HP filter needs an inlet pressure of at least 3 bars that assure brief times and low water consumption during the cleaning cycle.
Cleaning cycle take over without flow interruption, allowing continuity on the filtration process.
 

Included elements

Automatic filter with suction nozzles AISI 304 - AISI 316

VTO is a self-cleaning screen filter with stainless steel body.
The “sandwich” type internal cartridge consists of a polyester or stainless steel AISI 316 filtrating mesh closed between two stainless steel AISI 316 tubular screen.
The filtration range is between 25 to 810 μm.
The cartridge is cleaned by a series of suction nozzles mounted on a rotating shaft device which is moved by a 24 Vcc electric motor.
The filter is supplied and already wired with: automation group, valves and pressure gauges.
For its best performance the VTO needs an inlet pressure of at least 3 bars, ensuring short times and low water consumption during the cleaning cycle.
During this phase the filer continues to produce permeate.

 

Automatic filter pressurized jets AISI 316

BIG MATIC is a self-cleaning filter with stainless steel body and with BM filter cartridges which can be superimposed up to number of five inside a single “vassel”.
Filtration degree of BM cartridges are from 1 to 32 μm and during the cleaning cycle BM cartridges rotate and are cleaned by pressurized nozzles which are powered by clean water at 5-7 bar, from an external pressure tube.
The filter is supplied and already wired with: automation group, pneumatic valves, electrical motor 24 Vcc with mechanical reducer, filter BM cartridges, manifolds and drain valve support frame.
According to the needs of the flow rate it’s possible to compose batteries combining more “vessels”.
For the best performance, BIG MATIC needs the inlet pressure of at least 1 bar, that guarantee time reduce and lower water consumption during the cleaning cycle.
In this phase the inlet and outlet flux is automatically closed.

 

Automatic filter pressurized jets AISI 316

BIG MATIC Modules is self-cleaning filter with stainless steel body and with BM filtrating cartridges which can be superimposed up to number of five inside a single “vessel”.
Filtration degree of BM cartridges are from 1 to 32 μm and during the cleaning cycle BM cartridges rotate and are cleaned by pressurized nozzles which are powered by clean water at 5-7 bar, from an external pressure tube.
The flter is supplied and already wired with: cleaning group, electrical motor 24 Vcc with mechanical reducer, filtrating BM cartridges and drain valve.
According to the needs of the flow rate it’s possible to compose batteries combining more “vessels”.
For the best performance, BIG MATIC Modules needs the inlet pressure of at least 1 bar, that guarantee time reduce and lower water consumption during the cleaning cycle.
In this phase the inlet and outlet flux is automatically closed.

 

Automatic filter with suction pads AISI 304 - AISI 316

TOTEM ROTOR is a self-cleaning screen filter with stainless steel multi-body, suited to extreme employment’s conditions.
The “sandwich” type internal cartridges (two or three) consist of a polyester or stainless steel AISI 316 filtrating mesh closed between two stainless steel AISI 316 tubular screen.
The filtration range is between 25 to 810 μm and the cartridge is cleaned by a series of suction pads on a rotating shaft which is moved by a 24 Vcc electric motor.
The filter is supplied and already wired with: automation group, controller, valves and pressure gauges.
For the best performance the TOTEM ROTOR filter needs an inlet pressure of at least 3,5 bars that assure brief times and low water consumption during the cleaning cycle.
Cleaning cycle take over without flow interruption, allowing continuity on the filtration process.