Yacht DESAL 50 – watermaker 50 lit/h desalinizator vode

YACHT DESAL 50 – watermaker 50 lit/h ( 1.200 lit/dan)

 

Water Production:            50 liters/hr.  (13.2 U.S. gal./hr)   ±15% at 13.8 VDC

Power Requirements:     18 amps @ 12 VDC; 9 amps @ 24 VDC*

Feed Water Flow Rate:    500 liters/hr. (132 U.S. gal./hr)
Reverse Osmosis performance varies with the feed water temperature. The rated performance is tested at 26°C / 80°F water temperature at a salinity of 33g/ltr.

Quiet operation:                  less than 64 db at 1m distance.

Salt Rejection:                      min. 99.5%

Product Water TDS :         less than 500ppm TDS

Salinity Range:                     up to 50,000ppm TDS (NaCl)

PH Range:                               4 – 11

Free Chlorine Tolerance: <0.1 ppm

Operating Pressure:           55 bar  (800psi)

Feed Water Temp.Range: min. 0.5°C/33°F, max 45°C/113°F

Weight:                                    37 kg dry without water hoses and cables

 

Fresh water flush Procedure

The fresh water flush prepares your watermaker for a shut down period of seven to ten days. It can be repeated indefinitely as an alternative to the chemical long term storage of the membrane element. CAUTION: The boats fresh water pressure should not exceed the range of the pressure gauge. ( pressure must be less then 8 bar)

CAUTION: After storage, discard the product water for at least thirty minutes of initial operation before drinking or before use in food preparations.

Feed Water Flow Rate: 500 liters/hr. (132U.S. gal./hr) Reverse Osmosis performance varies with the feed water temperature. The rated performance is tested at 26°C / 80°F water temperature at a salinity of 33 g/ltr.e watermakers